Downloadable guns 'possible'
Sat, 22 Dec 2012 8:23a.m.
By Jason Dearen
Downloading a gun design to your computer, building it with a three-dimensional printer that uses plastics and other materials, and firing it minutes later. No background checks, no questions asked.
Sound far-fetched? It's not. And that is disquieting for gun control advocates.
Rep. Steven Israel, D-NY, said the prospect of such guns becoming reality is reason enough for the renewal of the Undetectable Firearms Act, which makes it illegal to build guns that can't be detected by X-ray or metallic scanners. That law expires at the end of 2013.
At least one group, Defense Distributed, is claiming to have created downloadable weapon parts that can be built using the increasingly popular new-generation of printer that can create 3D objects with moving parts.
University of Texas law student Cody Wilson, 24-year-old "Wiki Weapons" project leader for Defense Distributed, says the group last month test fired a semiautomatic AR-15 rifle - one of the weapon-types used in the Connecticut school massacre. Video posted by the group on YouTube indicates the gun was built with some key parts created on a 3D printer and fired six times before it broke.
No independent observer verified the test. Federal firearms regulators said they are aware of the technology's gun-making potential but do not believe an entire weapon has yet been made.
Still, Israel said the Defense Distributed effort was chilling.
When the Undetectable Firearms Act was last renewed in 2003, "a gun made by a 3D printer was like a Star Trek episode, but now we know it's real," he said.
Even with gun control pushed to the top of the national political conversation, Wilson is steadfast about reaching his goal of making a fully downloadable gun.
He keeps three AR-15 parts - one black, one white and another green - in his tidy student apartment in Austin, Texas. This weekend, he and his partners plan to print four new lower receivers - the segment of the gun that includes the trigger, magazine and grip.
Wilson was saddened by the Connecticut school attack but said Thursday that protecting the right to bear arms by giving everyone access to guns is more important in the long term than a single horrible crime.
"Clearly what happened in Connecticut was a tragedy," he told The Associated Press. "Still, by affording the Second Amendment protection, we understand events like these will happen."
He said he discussed with his partners whether they should suspend their effort, and they all decided it was too important to stop.
Wilson acknowledged there still are many technical hurdles to creating a complete gun from a 3D printer and provided no estimate on when the goal might be reached.
Special Agent Helen Dunkel of the federal Bureau of Alcohol, Tobacco, Firearms and Explosives, which helps enforce gun laws, said the agency is familiar with Wilson's project. She didn't offer an opinion but noted there is nothing illegal about making many types of guns at home. Exceptions would be high-powered weapons such as machine guns and those not detectable by airport scanners.
Advances in 3-D printing technology are fueling Wilson's goal. The printers were developed for the automobile, aerospace and other industries to create product prototypes from the same hard plastics used in toys such as Legos. Hobbyists mainly use the printers to design Christmas ornaments, toys and gadget accessories.
Prices of the machines have fallen as the consumer market grows, leading to a surge in interest from people in the so-called "maker" scene. Low-end 3D printers can now be purchased online for as little as US$1,500. More high-end printers needed to make gun parts cost at least US$10,000.
Stratasys Ltd. makes 3D printers, but gun-making was never something envisioned for the machines, said Shane Glenn, director of investor relations at the Eden Prairie, Minn.-based company.
"The gun issue is something that the 3D printing industry will have to address going forward," Glenn said.
Right now, most people interested in 3D printing rent time on one of the machines. There are a number of businesses and co-ops in major cities that allow access to the machines for a nominal fee.
At San Francisco's TechShop, which features a 3D printer for its members, assembling firearms is strictly prohibited and staff is trained on the policy, company spokeswoman Carrie Motamedi said.
Wilson acknowledged his idea has met resistance from those active in 3D printing.
"The early adopters of 3D printing technology seem to be an educated, more liberal group who were against firearms to begin with," he said.
Some involved in the development of the technology are now worried the gun project might spur regulations that will hurt or curtail their projects, he added.
Early schematics created by Wilson's group were posted on Thingiverse, a Brooklyn, N.Y.-based website that serves as a hub for 3D printing aficionados. After the school shooting, Thingiverse took down the links.
Spokeswoman Jenifer Howard said the focus of the website is "to empower the creative process and make things for good."
Thingiverse's terms of service state the site cannot be used to share content that contributes to the creation of weapons.
Wilson said his group has posted the links to the schematics on its own website.
Paul Saffo, a Silicon Valley technology forecaster who teaches at Stanford University's engineering school, said the Defense Distributed work carries on a tradition of tech geeks using innovation to make a political point, in this case on gun control and Second Amendment freedom.
"If you want to get people's attention in Washington, you say something. If you want to do it in Silicon Valley, you make something," Saffo said.
He said the technology exists now for a highly motivated group to make a plastic gun on a 3D printer that could avoid airport scanners. But the equipment is still too expensive for most people.
"Nobody right now needs to worry about the bright teenager making a gun on a printer in their bedroom," he said.
Post a Comment
Before commenting, please take the time to read our moderation guide
(Won't be published)
26/12/2012 3:56:57 p.m.
"Guns" that fire a cartridge without having a barrel have been around for centuries. They were mostly used as burglar/ poacher alarms. The British made similar devices during WWII that took a .303 cartridge.New Zealand's military rifle, the Steyr Aug, has many plastic parts.I remember 30 years ago I bought a "plastic" dagger in the USA. There was a major hue and cry about these going through scanners at the time. No catastrophies happened.Of course, after 9/11 it was falsely claimed that the hijackers used plastic knives and box cutters so airlines and the US government could avoid any liability.Anyone thinking that guns are complicated need only search pen or zip guns on the net.Ammunition is made of metal which will show on xrays. Rail guns need lots of electricity. If airport security were competent they would note these things. But, as it's been shown, they have trouble picking up even metal guns.A geek could make a full plastic gun that may or may not survive firing a shot without blowing up, but, ultimately how many people in the world proportionally would ever get killed by one being fired, compared to those slaughtered day in day out by drunken drivers!
26/12/2012 8:41:48 a.m.
A gun is something that fires a projectile, and even a conventinal type plastic gun that soon fails after a few shots is still a gun.These 3D printers CURRENTLY wont make durable plastic parts that will take repeated high pressure/stress. You can get more expensive equipment for cutting harder materials than plastic, which can probably use similar software as these 3D printers use. They already have 3D movement controls, so modifying the printer software to run will be possible with CAD/CAM.If take something like a shotgun shell, crims used saw-off barrels and this can reduce the pressure, and the accuracy, and the distance they can fire, yet still be very dangerous/deadly. Can read some Tom Clancey, which describes how to make a shotgun shell weapon with no barrel. Next we will look to ban reading as knowledge is dangerous!If take electro magnetic propulsion, this can be used to accerate objects to high velocity very quickly, ie like a gun. If reduce the projectile size it reduces the energy requirement, add a feed mechanism and its an automatic weapon. Currently its like a smooth-bore, just pushing a projectile, but work could be done to spin the projectile for better accuracy. How sci-fi is EMP? Well they can accelerate a train of thousands of tonnes to over 300kph, and this is used daily, so using the same tech to fire a few grams is not sci-fi any longer.Tech is out there. These printers are one line of that tech.
22/12/2012 8:51:50 a.m.
Iva Biggun wrote:
Just to put this into perspective - when a firearm shoots, it generates pressure of over 60,000 PSI. A 3D printed plastic unit simply cannot withstand that type of pressure at the moment, so the concept of a 3D printed gun at home is just being silly. No firearms exist in the world that use these components in plastic - barrel, sear, chamber, etc.
Sounds like the stories of being able to fly from Sydney to London in 2 hours with hyper travel. The reality simply doesn't exist, now or in the near future.
Despite its disappointing stock market performance, the company has delivered strong financial results.
Google's share price hit new highs last week after the company's annual developer event.
By early next year, Google will have released Google Glass.
Wellington company Xero has scooped the top prize at the annual Hi-Tech Awards.
A senior Australian politician has fallen foul of social media.
Copyright © 2013 MediaWorks TV. All Rights Reserved.